IMI SketchUp Models

01.090.0301 Base of Wall | Adhered Brick Veneer, Wood Stud Backing, Lath & Scratch Coat This detail illustrates a base of wall condition for adhered brick veneer over wood backing. A continuous air/moisture/vapor barrier (WRB) over the sheathing provides resistance to air and moisture. Continuous insulation outside the sheathing provides thermal control, and may be supplemented with additional insulation in the stud cavity. Used as a rainscreen device, the drainage mat with protective filter fabric allows moisture to escape the wall via the corrosion resistant perforated weep screed at the horizontal termination. The WRB is applied over the weep screed in shingle fashion. A self-furring lath embedded in a scratch coat of mortar reinforces the veneer system. The veneer is adhered to the reinforced scratch coat with a bond coat of polymer modified mortar. The joints between the units may be pointed in using a masonry mortar.

01.080.0301 Base of Wall | Adhered Brick Veneer, Steel Stud Backing, Lath & Scratch Coat   This detail illustrates a base of wall condition for adhered brick veneer over light gauge metal framing. A continuous air/moisture/vapor barrier (WRB) over the sheathing provides resistance to air and moisture. Continuous insulation outside the sheathing provides thermal control, and may be supplemented with additional insulation in the stud cavity. Used as a rainscreen device, the drainage mat with protective filter fabric allows moisture to escape the wall via the corrosion resistant perforated weep screed at the horizontal termination. The WRB is applied over the weep screed in shingle fashion. A self-furring lath embedded in a scratch coat of mortar reinforces the veneer system. The veneer is adhered to the reinforced scratch coat with a bond coat of polymer modified mortar. The joints between the units may be pointed in using a masonry mortar.     

01.070.0301 Base of Wall | Adhered Brick Veneer, CMU Backing, Lath & Scratch Coat This detail illustrates a base of wall condition for adhered brick veneer over concrete masonry (CMU) backing. A continuous air/moisture/vapor barrier (WRB) over the CMU includes a transition membrane at the control joint, and provides resistance to air and moisture. Continuous insulation provides thermal control to supplement the natural thermal mass of the masonry backing. Used as a rainscreen device, the drainage mat with protective filter fabric allows moisture to escape the wall via the corrosion resistant perforated weep screed at the horizontal termination. The WRB is applied over the weep screed in shingle fashion. A self-furring lath embedded in a scratch coat of mortar reinforces the veneer system. The veneer is adhered to the reinforced scratch coat with a bond coat of polymer modified mortar. The joints between the units may be pointed in using a masonry mortar.  

03.070.0301 Base of Wall | Adhered Stone Veneer, CMU Backing, Lath & Scratch Coat This detail illustrates a base of wall condition for adhered stone veneer over concrete masonry (CMU) backing. A continuous air/moisture/vapor barrier (WRB) over the CMU includes a transition membrane at the control joint, and provides resistance to air and moisture. Continuous insulation provides thermal control to supplement the natural thermal mass of the masonry backing. Used as a rainscreen device, the drainage mat with protective filter fabric allows moisture to escape the wall via the corrosion resistant perforated weep screed at the horizontal termination. The WRB is applied over the weep screed in shingle fashion. A self-furring lath embedded in a scratch coat of mortar reinforces the veneer system. The veneer is adhered to the reinforced scratch coat with a bond coat of polymer modified mortar. The joints between the units may be pointed in using a masonry mortar.  

Base of Wall | Adhered Stone Veneer, Wood Backing, Lath & Scratch Coat This detail illustrates a base of wall condition for adhered stone veneer over wood backing. A continuous air/moisture/vapor barrier (WRB) over the sheathing provides resistance to air and moisture. Continuous insulation outside the sheathing provides thermal control, and may be supplemented with additional insulation in the stud cavity. Used as a rainscreen device, the drainage mat with protective filter fabric allows moisture to escape the wall via the corrosion resistant perforated weep screed at the horizontal termination. The WRB is applied over the weep screed in shingle fashion. A self-furring lath embedded in a scratch coat of mortar reinforces the veneer system. The veneer is adhered to the reinforced scratch coat with a bond coat of polymer modified mortar. The joints between the units may be pointed in using a masonry mortar.

Base of Wall | Adhered Stone Veneer, Steel Stud Backing, Lath & Scratch Coat  This detail illustrates a base of wall condition for adhered stone veneer over light gauge metal framing. A continuous air/moisture/vapor barrier (WRB) over the sheathing provides resistance to air and moisture. Continuous insulation outside the sheathing provides thermal control, and may be supplemented with additional insulation in the stud cavity. Used as a rainscreen device, the drainage mat with protective filter fabric allows moisture to escape the wall via the corrosion resistant perforated weep screed at the horizontal termination. The WRB is applied over the weep screed in shingle fashion. A self-furring lath embedded in a scratch coat of mortar reinforces the veneer system. The veneer is adhered to the reinforced scratch coat with a bond coat of polymer modified mortar. The joints between the units may be pointed in using a masonry mortar.

This model is an amalgamation of the six conditions represented individually in IMI's Anchored Veneer Masonry Wall collection. This consolidated model represents 1) Base of Wall; 2) Window Sill; 3) Window Head; 4) Shelf Angle; 5) Roof-Wall Interface; and 6) Top of Wall. Refer to those individual models for a more complete descriptions of their respective content and unique conditions shown in each.